Welcome to Jiangsu Lichao New Material Technology Co., Ltd.
Where is the high utilization rate of stainless steel coils reflected
source：www.cnlichao.net | Release time：2026年05月26日1. Continuous whole roll feeding, with less waste at the beginning and end
The steel plate is a single sheet, each with fixed corner scraps; Steel coils are continuous long strips, with only a small amount of wear and tear at the head and tail of the coil after being rolled onto the machine, greatly reducing fixed waste.
2. It can be cut/sliced as needed to match the size correctly
Can be cut into narrow strips of different widths, fixed length small boards, zero or micro excess materials online according to product width and length; Especially for products with multiple specifications and small batches, they have stronger adaptability than fixed size tablets.
3. Adapt to automated continuous production lines
Stamping, flattening, laminating, drawing, pipe making and other equipment can continuously feed materials without frequent material changes or docking of sheet joints. There is no splicing waste, and it also avoids size deviation and waste caused by manual cutting of boards.
4. Convenient reuse of surplus materials
The remaining narrow materials and short rolls after slitting can be classified and recycled for the production of auxiliary materials such as small accessories, gaskets, and hardware components, and the closed-loop utilization of materials; Scattered small boards are difficult to reuse.
5. The integrity of the entire board is good after opening and closing
The whole board surface obtained by flattening the steel coil is complete and without splicing. Compared with spliced boards, there will be no additional loss due to splicing and cutting when making large-area components.
prev:
What are the hardness grades of stainless steel s…
next:
What are the requirements for the storage environ…
【Related articles】
Jiangsu Lichao New Material Technology Co., Ltd.
+
WeChat ID:www.cnlichao.net
WeChat ID:www.cnlichao.net
Add WeChat
Contact us
The phone