-
What are the applications of stainless steel coils in the chemical industry
Stainless steel coils are widely used in various equipment manufacturing, pipeline systems, container lining and other scenarios in the chemical industry due to their excellent corrosion resistance, high temperature resistance, strength and processability. They are the core material for dealing with complex media (such as acids, alkalis, salts, organic solvents, etc.) and harsh working conditions
2025-08-06 -
What is the difference between cold rolling and hot rolling of stainless steel
1. Different production processes Stainless steel hot rolling is rolled above the recrystallization temperature of the metal material, and stainless steel cold rolling is rolled below the recrystallization temperature of the metal material, and each metal material has its own recrystallization temperature. crystallization temperature.
2022-07-25
- 11-032026
What are the effects of magnetism on the performance of stainless steel strip after cold processing
1. Mechanical properties Beneficial: Martensite is a hard phase, which, when combined with cold work hardening, increases tensile strength, hardness, yield strength, and elasticity. This is also the principle of 301 steel strip using large deformation to make spring plates and clamps.
- 10-262026
What are the temperature and humidity requirements for storing stainless steel coils, and how to pre
The overall goal of stainless steel coil storage control is to stabilize the storage environment, isolate corrosive media, and avoid condensation on the surface of the plate. By relying on environmental control, isolation protection, standardized stacking, and regular inspections, the risk of floating rust caused by chloride ions and water vapor adhesion is reduced, ensuring the surface quality of
- 10-192026
What is the effect of annealing treatment on the hardness, elongation, and internal stress of stainl
Annealing of stainless steel coils is a heat treatment process that generally changes the internal metallographic structure of the material through controlled heating, insulation, and slow cooling, in order to adjust mechanical properties and release residual internal stresses generated during the rolling process. There are corresponding differences in the effects of different annealing process se
- 10-132026
How to avoid corrosion and green spots caused by condensation salt spray during storage and shipping
The green spots generated during the storage and shipping of stainless steel coils are essentially chloride ions brought in by salt spray during shipping, forming a condensed water film between the layers and end faces of the steel coils, damaging the passive film of stainless steel, causing crevice corrosion and pitting corrosion, and generating chlorine containing corrosion products; Once water
- 10-082026
What is the usual method for controlling the shape of stainless steel strip
Stainless steel materials have high deformation resistance and obvious work hardening. Thin gauge strips are prone to defects such as medium waves, edge waves, quarter waves, and single-sided waves. Generally, roller system mechanical adjustment, segmented cooling, tension control, roller profile pre configuration, online plate shape closed-loop detection, and subsequent leveling and straightening
Jiangsu Lichao New Material Technology Co., Ltd.
WeChat ID:jinjiayi0512
Add WeChat
Contact us
The phone