-
Why is stainless steel coil used in stamping hardware
Stamping hardware is the use of punching machines to punch, bend, and stretch sheet metal. Stainless steel coils are used as raw materials for coil materials, taking into account material properties, coil processing advantages, corrosion resistance, appearance, and mass production. They are widely used in various stamping hardware parts.
2026-08-24 -
What are the precautions for stainless steel strips in the storage process
Core storage risks of stainless steel strips: iron ion contamination, rust, moisture pitting, surface scratches, coil deformation, mixed material errors, label loss. Once rust spots appear on austenitic stainless steel, they are difficult to remove.
2026-08-17 -
Why can't stainless steel coils be directly mixed with carbon steel materials when stored
Fundamental problem: Iron ion pollution (free iron pollution) causes induced corrosion on the surface of stainless steel, rather than the corrosion resistance failure of the stainless steel material itself.
2026-08-10 -
Which subsequent deep processing steps are suitable for the hot-rolled surface of stainless steel st
Stainless steel hot-rolled surface is not suitable for directly producing exposed finished products. Its advantages are thick thickness, low cost, and high substrate strength, making it suitable for working conditions that require subsequent cutting, forming, and precision machining.
2026-08-03 -
What is the production process of stainless steel coils
Divided into two categories: hot-rolled stainless steel coils and cold-rolled stainless steel coils (2B/BA, etc.) The mainstream route of steel mills: electric arc furnace smelting → AOD refining → continuous casting billet → hot rolling (producing hot-rolled coils); Hot rolled coils are used as raw materials and then enter the cold rolling process to produce cold-rolled stainless steel coi
2026-07-28 -
What equipment is stainless steel strip commonly used in the energy industry
Classify and organize according to new energy, traditional electricity, oil and gas petrochemicals, hydrogen energy, and nuclear power, and distinguish three types of uses: ultra-thin precision steel strips, structural bundling steel strips, and heat-resistant conveyor steel strips:
2026-07-22 -
What issues should be noted when rolling stainless steel coils
Stainless steel has high deformation resistance, is prone to work hardening, is easily oxidized at high temperatures, and is prone to cracking at the edges. It is divided into two parts: hot-rolled billet rolling and cold-rolled precision rolling. The raw materials, temperature, process parameters, equipment, lubrication, plate shape tension, surface protection, and later microstructure and proper
2026-07-13 -
What are the main uses of hot-rolled stainless steel coils in stainless steel coils
Hot rolled stainless steel coil is a thick material coil produced by high-temperature rolling, with a thickness range of 1.5-16mm and a surface with oxide black skin. It is thick in size, high in strength, and does not require appearance. It is mainly used in structural pressure bearing, chemical equipment, and heavy machinery scenarios.
2026-07-07 -
Why does stainless steel strip become magnetic after cold processing
1、 Core material foundation: 304/316L itself is austenitic non-magnetic stainless steel 304 and 316L belong to austenitic stainless steel. In the factory solution annealed state, all internal crystals are austenitic structure, and the austenitic crystal structure does not have ferromagnetism. The new soft steel strip is almost non-magnetic, and the magnet does not adsorb.
2026-06-30 -
What processing can be done on stainless steel coils
1、 Open coil basic processing (the first process of coil material) 1. Kaiping/Splitting Kaiping: Stainless steel coils are uncoiled, leveled, and cut into flat plates (stainless steel plates) for cutting, bending, and laser cutting. Slitting: Large rolls are cut into narrow strips of steel for welding pipes, steel strips, precision stamping, strapping, and decorative edge strips.
2026-06-22
- 11-032026
What are the effects of magnetism on the performance of stainless steel strip after cold processing
1. Mechanical properties Beneficial: Martensite is a hard phase, which, when combined with cold work hardening, increases tensile strength, hardness, yield strength, and elasticity. This is also the principle of 301 steel strip using large deformation to make spring plates and clamps.
- 10-262026
What are the temperature and humidity requirements for storing stainless steel coils, and how to pre
The overall goal of stainless steel coil storage control is to stabilize the storage environment, isolate corrosive media, and avoid condensation on the surface of the plate. By relying on environmental control, isolation protection, standardized stacking, and regular inspections, the risk of floating rust caused by chloride ions and water vapor adhesion is reduced, ensuring the surface quality of
- 10-192026
What is the effect of annealing treatment on the hardness, elongation, and internal stress of stainl
Annealing of stainless steel coils is a heat treatment process that generally changes the internal metallographic structure of the material through controlled heating, insulation, and slow cooling, in order to adjust mechanical properties and release residual internal stresses generated during the rolling process. There are corresponding differences in the effects of different annealing process se
- 10-132026
How to avoid corrosion and green spots caused by condensation salt spray during storage and shipping
The green spots generated during the storage and shipping of stainless steel coils are essentially chloride ions brought in by salt spray during shipping, forming a condensed water film between the layers and end faces of the steel coils, damaging the passive film of stainless steel, causing crevice corrosion and pitting corrosion, and generating chlorine containing corrosion products; Once water
- 10-082026
What is the usual method for controlling the shape of stainless steel strip
Stainless steel materials have high deformation resistance and obvious work hardening. Thin gauge strips are prone to defects such as medium waves, edge waves, quarter waves, and single-sided waves. Generally, roller system mechanical adjustment, segmented cooling, tension control, roller profile pre configuration, online plate shape closed-loop detection, and subsequent leveling and straightening
Jiangsu Lichao New Material Technology Co., Ltd.
WeChat ID:jinjiayi0512
Add WeChat
Contact us
The phone